WALTHER PDP DUTY HOLSTERS

Here is a list we put together to give you a quick reference guide to the Walther PDP Duty Holsters that are currently available. Keep in mind this list is specifically for the Walther PDP models but the holsters designed for the Walther PDP will also accommodate the Walther PDP F-Series models.

If you’d like to see a list of standard Inside the Waistband and Outside the Waistband Walther PDP holsters you can check those out > HERE <

In another article, we’ve compiled a list of aftermarket and factory parts currently available for the new Walther PDP currently available.

COMP-TAC DUTY HOLSTERS

COMP-TAC CT2-A LEVEL 2: FOR MODLIGHT PL350 – FITS: PDP 5″ Compact & Full Size

The CT2-A™ is a Level II holster that uses friction and an ejection port lock that must be released before the firearm can be drawn. The CT2-A™ is designed with the intent that a master grip is achieved before fully withdrawing the weapon. The intuitive, autolocking ejection port lock makes this one of the fastest Level II holsters available on the market today. This holster is available with or without lights.

Two levels of retention: ejection port lock and friction retention
Ejection port lock (EPL) automatically locks when weapon is holstered
Safety shroud assists in concealing the activation lever
Self-contained EPL control housing serves to protect ejection port lock
Friction retention screws can be adjusted for secure holding around trigger guard and muzzle
Optics cut enables use of most red-dot optics
Holster design provides for access to activation lever while maintaining master grip
Kydex^® holster body expertly formed to restrict undesired movement of gun (no “holster rattle”)
Duty drop leg mount accommodates 1.5” to 2.25” duty belts
Designed for superior all-day-wear comfort

COMP-TAC CT2-A LEVEL 2: FOR SUREFIRE X-300U-B – FITS: PDP 4.5″ Compact & Full Size

Two levels of retention: ejection port lock and friction retention
Ejection port lock (EPL) automatically locks when weapon is holstered
Safety shroud assists in concealing the activation lever
Self-contained EPL control housing serves to protect ejection port lock
Friction retention screws can be adjusted for secure holding around trigger guard and muzzle
Optics cut enables use of most red-dot optics
Holster design provides for access to activation lever while maintaining master grip
Kydex^® holster body expertly formed to restrict undesired movement of gun (no “holster rattle”)
Duty drop leg mount accommodates 1.5” to 2.25” duty belts
Designed for superior all-day-wear comfort

COMP-TAC CT2-A LEVEL 2: FOR STREAMLIGHT TLR-1 H/L – FITS: PDP 4.5″ Compact & Full Size

Two levels of retention: ejection port lock and friction retention
Ejection port lock (EPL) automatically locks when weapon is holstered
Safety shroud assists in concealing the activation lever
Self-contained EPL control housing serves to protect ejection port lock
Friction retention screws can be adjusted for secure holding around trigger guard and muzzle
Optics cut enables use of most red-dot optics
Holster design provides for access to activation lever while maintaining master grip
Kydex^® holster body expertly formed to restrict undesired movement of gun (no “holster rattle”)
Duty drop leg mount accommodates 1.5” to 2.25” duty belts
Designed for superior all-day-wear comfort

COMP-TAC CT2-A LEVEL 2 – FITS: PDP 4.5″ Compact & Full Size

Two levels of retention: ejection port lock and friction retention
Ejection port lock (EPL) automatically locks when weapon is holstered
Safety shroud assists in concealing the activation lever
Self-contained EPL control housing serves to protect ejection port lock
Friction retention screws can be adjusted for secure holding around trigger guard and muzzle
Optics cut enables use of most red-dot optics
Holster design provides for access to activation lever while maintaining master grip
Kydex^® holster body expertly formed to restrict undesired movement of gun (no “holster rattle”)
Duty drop leg mount accommodates 1.5” to 2.25” duty belts
Designed for superior all-day-wear comfort

COMP-TAC CT3 LEVEL 3 – FITS: PDP 4.5″ Compact & Full Size

The CT3 is a Level 3 holster that uses friction, an ejection port lock, and a hood that must be released before the firearm can be drawn. The CT3 is designed with the intent that a master grip is achieved before fully withdrawing the weapon. This combined with the autolocking ejection port lock and the intuitive self-activated hood system makes this one of the fastest Level 3 holsters available on the market today. This holster is available for fits with lights and in fits without lights.

The CT3 comes with a belt mount and integrated drop offset already assembled, however among the list of additional accessories is also a mid ride belt mount and the QLS Adaptor plate.

3 levels of retention
Available for fits with lights and without lights
Belt mount is designed to keep the firearm from canting into the wearer’s leg
Allows for a Master Grip before fully withdrawing the firearm
Hood can be released without releasing firearm
One of the fastest draws in the Level 3 market
Very intuitive to use

*Available exclusively to the North American Market.

COMP-TAC CT3 LEVEL 3: FOR SUREFIRE X300 U-B – FITS: PDP 4.5″ Compact & Full Size

The CT3™ is a Level III holster that uses friction retention, an ejection port lock, and a hood that must be released before the firearm can be drawn. The CT3™ is designed with the intent that a master grip is achieved before fully withdrawing the weapon. This combined with the autolocking ejection port lock and the intuitive self-activated hood system makes this one of the fastest Level 3 holsters available on the market today. This holster is available for fits with lights and in fits without lights.

The CT3™ comes with a belt mount and integrated drop offset already assembled, however among the list of additional accessories is also the CT3™ Mid-Ride Belt Mount and the CT3™ Adaptor Plate for QLS.

- Three levels of retention
- Available for fits with lights and without lights
- Belt mount is designed to keep the firearm from canting into the wearer’s leg
- Allows for a master grip before fully withdrawing the firearm
- Hood can be released without releasing firearm
- One of the fastest draws in the Level 3 market
- Very intuitive to use
- Available exclusively to the North American Market.

*NON-LIGHT BEARING MODEL SHOWN

COMP-TAC CT3 LEVEL 3: FOR STREAMLIGHT TLR1-HL – FITS: PDP 4.5″ Compact & Full Size

- - Three levels of retention
  - Available for fits with lights and without lights
  - Belt mount is designed to keep the firearm from canting into the wearer’s leg
  - Allows for a master grip before fully withdrawing the firearm
  - Hood can be released without releasing firearm
  - One of the fastest draws in the Level 3 market
  - Very intuitive to use
  - Available exclusively to the North American Market.

*NON-LIGHT BEARING MODEL SHOWN

COMP-TAC CT3 LEVEL 3: FOR MODLIGHT PL350 – FITS: PDP 5″ Compact & Full Size

- - - Three levels of retention
    - Available for fits with lights and without lights
    - Belt mount is designed to keep the firearm from canting into the wearer’s leg
    - Allows for a master grip before fully withdrawing the firearm
    - Hood can be released without releasing firearm
    - One of the fastest draws in the Level 3 market
    - Very intuitive to use
    - Available exclusively to the North American Market.

*NON-LIGHT BEARING MODEL SHOWN

COMP-TAC “BLUE DUTY HOLSTER SERIES LEVEL 2: FOR SUREFIRE X300 – FITS: PDP 4.5″ Compact & Full Size

The Blue Duty Holster Series™ is Comp-Tac’s® answer to LE customers who want to carry a weapon with a rail-mounted light AND a red-dot optic. The thumb-release bale is designed to work with most red-dot optics on the market, allowing officers to carry the most up-to date equipment out there. The unique holster design allows the firearm to be placed securely in the holster with a light attached AND without a light attached. This gives all officers the versatility to carry their equipment in any set up, securely, safely and with the Comp-Tac® deployment speed they have come to love.

Made of 100% aircraft-grade Kydex®, which gives a smooth finish for easy draw and re-holster
The Blue Duty has two retention points, one on the back and one at the bottom (the bottom retention screw is specifically designed for retention adjustment for light/no light set up)
Includes belt mount (fits 1.5”-2.25” belts), paddle mount (fits up to 2” belts) and drop offset.

Features cant adjustability.

Optics ready for red-dot sights

Holster is designed to work with specific make model handgun and specific light – it is not recommended to use a holster for a gun or light that it is not made for.

Available exclusively to the North American Market.

DARA HOLSTERS

DARA LEVEL 2 DUTY HOLSTER

FITS: PDP 4″, 4.5″, 5″ COMPACT AND FULL SIZE

Dara’s Level II Duty Holster is not just any OWB Holster with a hood slapped on it. It was designed from the ground up for the rigors of duty and guaranteed for life. Starting with a robust body formed using .125″ purpose-blended Polymers, then fastened with blackened stainless steel hardware. This rig utilizes our tried and true Military Grade adjustable Rubber Retention System that allows you to tune the resistance to your preferred draw stroke. Our auto throw hood is locked in place until the intuitively located thumb lever is depressed. The hood then rotates with enough force to move loose garment, making your firearm ready when you need it. Don’t settle for less- if you demand quality and endless reliability, you’ve found it.

Features

-Our Duty Holsters are hand-crafted in the USA from .125″ Boltaron and molded precisely to each firearm for a perfect fit.

-Our newly redesigned Duty Holsters are now equipped to accommodate slide-mounted optics and suppressor height sights.

– 2 Levels of Retention: Adjustable Level 1 Retention System- Our rubber retention system was designed by us for use specifically with our holsters. Able to hold the most minute adjustments, this advanced system eliminates the need for Loctite or any other thread-locking substance. Second level of retention consists of a spring-operated thumb throw hood system.

-The Level 2 Duty Holsters come attached to our Drop Offset System and Double Loop. This system drops the holster to clear body armor and to allow for a more natural draw stroke. Another choice is our ALQD Quick Disconnect System.

-The Double Loop attachment fits 1.5″-2.25″ belts. The belt width is adjustable and eliminates the need to purchase multiple attachments for different belts. The double loop also allows for ride height and cant angle adjustment.

-Holster comes with an optional leg strap for added stability.

SAFARILAND

6000 SERIES DUTY HOLSTERS (MULTIPLE COLORS)

FITS: PDP COMPACT & FULL-SIZE 4″ & 4.5″ & F-SERIES 4″

There are four Safariland Duty Holsters available for the Walther PDP Models. Options include optics and weapon-mounted lights.

6360RDS – ALS/SLS LEVEL 3 RETENTION HOLSTER: 6390RDSO – ALS LEVEL 1 RETENTION HOLSTER:

6354RDSO – ALS HOLSTER W/ QLS19 FORK: 6365RDS – ALS/SLS LEVEL 3 RETENTION HOLSTER:

DeSANTIS HOLSTERS

DeSANTIS THUMB BREAK SCABBARD HOLSTER – OWB

FITS: PDP 4″ COMPACT / PDP 4″ & 4.5″ FULL SIZE

The firearm rides high and is presented at an optimum draw angle. Its thumb break and exact molding, together with a tension device, allows for a secure and highly concealable carry. This picture illustrates the three-slot model. Belt slots are 1 3/4″ wide. Available in black or tan leather, with or without suede lining, plain or basket-weave finish. Some models with two belt slots and without tension device.

DeSANTIS SPEED SCABBARD HOLSTER – OWB

FITS: PDP 4″ COMPACT / PDP 4″ & 4.5″ FULL SIZE

The Speed Scabbard® is designed to meet the needs of plainclothes professionals preferring a holster without a thumb break while still providing firearm retention. This is accomplished with precise molding and tension screw device on most models. Available in black or tan unlined leather. Belt slots are 1 3/4″ wide. Some models with two belt slots and without tension device

T2G CUSTOM PRODUCT

T2G DUTY HOLSTER FOR PDP AND PDP F-SERIES – OWB

FITS: PDP COMPACT/FULL-SIZE & F-SERIES 3.5″ & 4″

The T2G Custom Products Duty Holster for the Walther PDP (and “F” Series) was designed in cooperation with Florida’s Brevard County Sheriff’s Office and with direct input from professionals at Walther USA to ensure that it is the finest LEO holster on the market.

This premium holster is built as a semi-custom production. This means that every holster is made by hand right here in the USA and that the fit of our holster is far superior to what you would expect from mass-produced holsters available from other companies.

Whether you require a Level 1, 2, or level 3 retention, T2G Custom Products has the top quality innovative options that can’t be beaten at any price point!

At T2G Custom Products we will never promise you that our products are the cheapest on the market. We will however promise you that you will get the best holster on the market for a fair price.

INCOGNITO CONCEALMENT

INCOGNITO CONCEALMENT: LEVEL 2 DUTY HOLSTER – OWB

FITS: PDP 4″ COMPACT/FULL-SIZE

Level 2 retention means the holster has the draw (level 1) and a locking hood mechanism (level 2). These robust holsters are made out of thick material and are designed to withstand hard impacts and abuse. Level 2 retention is often required by security and law enforcement agencies to help keep the holster secure in the event of an altercation.