Walther P22 Threaded Adapter Guide
(Note: This ONLY applies to all NON-P22CA models.)
*FOLLOW ALL SAFETY PROCEDURES AND ENSURE YOUR FIREARM IS UNLOADED BEFORE YOU BEGIN. YOU MUST FOLLOW ALL SAFE FIREARMS HANDLING GUIDELINES.
There are two versions of the Walther P22 barrel. If you are looking to purchase a threaded barrel adapter for your P22, you will need to determine which type of barrel you have.
INSTRUCTIONS FOR DETERMINING WHICH P22 THREADED BARREL ADAPTER YOU HAVE.
To do this you will need to first ensure that your firearm is unloaded and in a safe condition.
Next, remove the end-cap/thread protector from the barrel.
Once you remove the end-cap/thread protector you need to examine the barrel to determine the depth from the end of the barrel to where the threading starts.
If you need instructions on how to disassemble your P22 you can > watch the YouTube video on Disassembly here. <
TWO TYPES OF THREADING ON P22 MODELS:
1) (NEW STYLE) LONG GUIDE: The Long Guide is for P22 models with nitrided barrels
If the barrel of your P22 is in the configuration shown above then you will need the Threaded Barrel Adapter Item Number: 512105
THIS LINK NEEDS TO BE CHANGED TO THE NEW LONG GUIDE > Click for link to Threaded Barrel Adapter <
2) (OLD STYLE) SHORT GUIDE: The Short Guide is for P22 models with non-nitrided barrels.
If the barrel of your P22 is in the configuration shown above then you will need the “Short Adapter” or to update to a newer outer barrel.
You can find them here:
The Silencer Store: > Short Adapter <
Midway: > Short Adapter <