Walther PDP Aftermarket Support
(NOTE: More Accessories on the way. This article will be updated as new products become available.)
What type of aftermarket support is available for a new handgun is a big consideration when choosing whether or not to purchase. Historically aftermarket support for Walther pistols has been slow at best. We took all of this into consideration when we designed the new Walther PDP. Below is a list of many of the aftermarket and factory products currently available for the new Walther PDP. The iron sight cuts are now universal and will work with aftermarket Glock sights so you will no longer have the frustration of finding PDP-specific sights online. Holsters are another one of those necessities that must be available upon release of a new handgun. We have been working with a number of well-respected holster makers to ensure there would be PDP holsters available. > CLICK TO VIEW PDP HOLSTER OPTIONS <
NOTES:
MAGAZINES: The PDP Compact can use standard PPQ magazines. The PDP Full-Size must use the 18round PDP magazines.
SIGHTS: The PDP sights are compatible with nearly all existing Glock 17 and 19 sights on the market.Â
If you would like to see Parts Compatibility between the PDP models and PPQ M2 models as well as PDP Compact part comparisons with PDP Full-Size models click the link below:Â
> PDP PARTS COMPARISONS <
MOST Glock 17 & Glock 19 Series Sights
Check with your favorite handgun sight company. There are 100’s of options out there.Â
WEAPON LIGHTS
STREAMLIGHT (Multiple) < Click to see full list
TLR-8 GUN LIGHT WITH RED LASER AND SIDE SWITCH
The small and mighty TLR-8 with a red laser securely fits a broad range of full-size and compact handguns. Low-profile design prevents snagging and a “safe off” feature prevents accidental activation, saving batteries. Ambidextrous side switch.
SUREFIRE (Multiple) < Click to see full list
Special high-performance LED produces 1,000 lumens
Custom TIR lens creates smooth, far-reaching light with a larger center spot beam that’s highly effective for close- to medium-range engagements
Integral ambidextrous momentary- and constant-on switching provides easy, instant activation
MAGAZINE BASEPADS/EXTENSIONS/MAGWELLS (PDP COMPACT ONLY)
WALTHER VICKERS BASEPAD < Click
FITS: PDP & PPQ MAGAZINES
• Tough machined aluminum construction.
• Flared shape with grooved finger scallops offer plenty of grip
• Molded dimples allow easy marking and numbering of spare magazine
• Molded dimples allow easy marking and numbering of spare magazines
TARAN TACTICAL (Multiple) < Click to see full list
FITS: PDP COMPACT & PPQ MAGAZINES
BASE PADS + 3 & +5 FOR PPQ (9MM & .40CAL)
– Patented proven push pin design.
– Easily attaches and detaches from the magazine.
– No specialty tools or devices required to disassemble.
– The added weight helps the magazine drop free easier for faster reloads.
– Made in the USA
SPRINGER PRECISION +5 Mag Extension < Click it
FITS: PDP COMPACT & PPQ MAGAZINES
BASE PAD +5 FOR PPQ (9MM & .40CAL)
Springer Precision Walther PPQ 9/40 140mm extended capacity base pads are CNC machined from aluminum and hard anodized for long service life. This lengthens the magazine and adds rounds to your magazine. The unique locking mechanism allows a very solid attachment with a simple backing out of the discrete set screw. They fit the USPSA 140mm magazine gauge. The unique attachment design provides a low profile, sleek design that is very stable and easy to remove. * We include a .050 hex driver that makes installation and removal a breeze. Up to an additional 5-6 rds 9mm. 1.339oz
SPRINGER PRECISION +0 Mag Base Pad < Click it
FITS: PDP & PPQ MAGAZINES
BASE PAD +0 BASE PAD FOR PPQ (9MM & .40CAL)
Walther PPQ extended base pads are CNC machined from aluminum and hard anodized. This lengthens the magazine .375″ to make for easier, more reliable magazine changes.  They are perfect for IDPA ESP and USPSA.  1.127oz (approx .684oz with lightening option)
TAYLOR FREELANCE (Multiple)Â < Click to see full list
FITS: PDP COMPACT & PPQ MAGAZINES (PDP FULL-SIZE VERSION COMING SOON)
BASE PAD +0, +5, +6 BASE PADS & ACCESSORIES FOR PPQ (9MM/.40CAL/.45ACP)
Optimize your M1, M2, Q4, Q5 Match, or Q5 Steel Frame Walther with our “Overdrive” magwell!Â
Fast, Fumble-Free Reloads Extends the frame for added control
Textured exterior (for control), smooth interior (for speed)
Works with MODIFIED factory basepads (you’ll need to trim down to fit)
Works with TF 140mm +6 and +0 “Competition” basepadsÂ
ZR TACTICAL SOLUTIONS +0 Mag Bumper < Click it
FITS: PDP & PPQ MAGAZINES
Walther PPQ aluminum basepads can be used with or without a magwell to allow positive insertion. These fit All PPQ 9mm models and allow standard 15rd magazines to work in the factory Walther magwell. These do not add capacity. Finish is black anodize
Billet Aluminum with anodized finish
Fits all PPQ and P99 9mm models
Allows use of 15rd mags with Walther factory Magwell (such as the Q4 Tac)
LEAPERS – UTG +0 Mag Base Pad < Click it
FITS: PDP & PPQ MAGAZINES
BASE PAD +0 BASE PAD FOR PPQ (9MM & .40CAL)
Proudly designed and made in the USA
Precision Machined from 6061-T6 Aluminum
.314″ Extended height and 1oz.
IDPA & USPSA Legal
MAGAZINE RELEASE OPTIONS
WALTHER Q-SERIES EXTENDED BUTTON (Oval) < Click it
FITS: PDP & PPQ MODELSÂ
Enhance your reloads with the extended magazine release button! This button fits PPQ M2 pistols in 9mm and .40 S&W, including Q5 Match and Q4 Tac, Q5 and Q5 Steel Frame, and PDP models.Â
WALTHER Q-SERIES EXTENDED BUTTON (Round) < Click it
FITS: PDP & PPQ MODELSÂ
Available in Black and Blue
Enhance your reloads with the extended magazine release button! This button fits PPQ M2 pistols in 9mm and .40 S&W, including Q5 Match and Q4 Tac, Q5 and Q5 Steel Frame, and PDP models.Â
RECOIL ASSEMBLY/GUIDE RODS/RECOIL REDUCTION
WALTHER TUNGSTEN GUIDE ROD RSA 50N < Click it
FITS: PDP & PPQ MODELS
The Tungsten weighted guide rod recoil spring assembly is 4 times heavier than the factory polymer RSA. This will lead to quicker target re-alignment and more accurate follow-up shots! This 50 Newton RSA is a direct replacement for all PDP models, and 4” and 5” PPQ’s. (9mm & .40cal) *Will not work with PPQ 22 or PPQ 45.
SPRINCO – Recoil Management Guide Rod System < Click it
FITS: PDP & PPQ MODELS
Extend the life of your weapon by installing a Sprinco Recoil Management Guide Rod System. A secondary, or sub-spring assembly is incorporated onto a heat-treated, stainless steel guide rod to cushion the slide to frame impact! All components, including the chrome silicon wire secondary springs, are hand polished to a brilliant finish for reduced friction.
Our products are used by many of the top competition shooters in the world, including both World and Multi-National Champions. Their reliability is validated by their use by Law Enforcement and Elite U.S. Military Forces around the world in combat deployment.
DPM – RECOIL ROD REDUCER SYSTEM < Click it
FITS: PDP & PPQ MODELS
MECHANICAL RECOIL REDUCTION SYSTEM
This system works due to the multi spring intricate rod (3 springs) and controls the functionality of the pistol. The third spring which is contained within the rod controls the movement of the slide so it never rams on the frame. The system includes 1 spring plug and 2 different external springs.
The external springs are different in length, the long spring is heavy and the short is light so the shooter can fine-tune the pistol on the opening and locking positions (slide on the battery) according to his/hers personal standards. > CLICK FOR OTHER DPM PPQ OPTIONS <
ZR TACTICAL SOLUTIONS – Uncaptured Stainless Guide Rod < Click it
Our newly designed, one-piece stainless guide rod for Walther PPQ line allows for use of 1/4″ diameter springs to better tune your pistol. This allows the use of any Glock spring in order to adjust the recoil impulse of the pistol. Swiss turned from 300 series stainless, the rods will drop into any 4″ or 5″ PPQ. The rods are fluted for lower friction. Made in USA.
NOTE: Will NOT fit PPQ45.
BT GUIDE RODS – COMPLETE DROP-IN RECOIL ASSEMBLYÂ < Click it
PDP/P99/PPQ/PPQ M2 Â Sta-Tite guide rods are available as drop-in assemblies with factory springs direct from Germany.
By adhering to the manufacturer’s dimensions, fit is assured.
By using the factory spring, the function is assured.
When you install a BT rod, you can rest assured that your pistol will function properly.
COMPENSATORS
COMMING SOON! PARKER MOUNTAIN MACHINE < Click it
Parker Mountain Machine is currently developing a Walther PDP Compensator.
We will update this article as soon as the product is launched.Â
UPGRADED OPTIC-MOUNTING PLATES
COMMING SOON! C&H PRECISION OPTIC PLATES < Click it
We will be offering upgraded Walther PDP Optic-Mounting Plates OEM in the USA by our PartnerÂ
C&H Precision. The plates are lower in profile than the Factory offered Optic Plates.
There will be a variety of plates to cover the vast majority of footprints for Pistol Mounted Red Dot sights
offered on the market.Â
Models Include:
Aimpoint ACRO
Sig Romeo
Trijicon RMRCC
Holosun 509T
TRIGGERS
WALTHER DYNAMIC PERFORMANCE TRIGGER < Click it
FITS: PDP & PPQ MODELS
Colors: Black and Grey.
Compatibility:
All PDP’s
All Q4 and Q5 Steel Frame’s
All Q4 Tac and Q5 Match M1 & M2’s
All PPQ’s in 9mm and 40cal M1 & M2’s
*Does not fit PPQ 45, PPQ SC, or PPQ 22
Trigger Pull Weight: ~ 3.8lbs
OVERWATCH PRECISION – TAC TRIGGER KIT < Click it
FITS: PDP & PPQ MODELS
Features include:
- 58% decrease in pre-travelÂ
- 50% decrease in total travel
- CNC-tuned NP3’ed OEM bar for constancy, safety, and quality
- 3.8lb (red) and 4.4lb (green) return springs included
- Compatible with OEM return spring (provides a 5lb+ pull)
APEX TACTICAL – FORWARD SET TRIGGER < Click it
FITS: PDP & PPQ MODELS
Our Flat-Faced Forward Set Trigger (with Apex Tuned Trigger Bar) takes the best out-of-the-box factory trigger to a whole new level without jeopardizing safety or performance. When installed, this trigger will:
- Reduce overall travel by approx. 40%Â
- Shorten reset
- Smooth uptake and resetÂ
- Deliver a crisp trigger break
- Maintain factory drop safety values
- Direct drop-in replacement, no fitting required
